Removing or replacing the service door, Removing the service door, Replacing the service door – HP ProBook 450 G0 Notebook PC User Manual
Page 61

Removing or replacing the service door
Removing the service door
Remove the service door to access the memory module slot, hard drive, and other components.
1.
Inserting or removing the battery on page 41
).
2.
With the battery bay toward you, remove the optional security screw (1), (if the optional security
screw is being used, see
Using the optional security screw on page 50
), and then slide the
service door release latches (2) to release the service door.
NOTE:
If you do not want to use the optional security screw, you can store it inside the battery
bay.
NOTE:
You can slide the service door release latches simultaneously or you can slide them
one at a time.
3.
Slide the service door towards the front of the computer (3) and lift (4) to remove the service
door.
Replacing the service door
Replace the service door after accessing the memory module slot, hard drive, regulatory label, and
other components.
1.
Tilt the service door down to align the tabs on the service door with the latches on the computer
(1).
2.
Insert the alignment tabs (2) on the rear edge of the service door with the notches on the
computer.
NOTE:
The release latches automatically lock the service door into place (3).
Using hard drives
51