HP NC382i Integrated Dual Port PCI Express Gigabit Server Adapter User Manual
Page 21
Installation and configuration 21
•
The drivers are not being loaded in the right order during installation.
•
The target disk provided is not large enough.
•
The initiator is not configured with the correct LUN from which to boot (some targets start numbering
data devices at 1 not 0).
•
The target is not configured to allow access to the specified LUN by the initiator.
•
The Slipstream CD creation step contains an error causing F6 phase to fail. Check for the following
problems:
o
Insure the folder and file pathnames are correct in the Dosnet.inf and Svcpack.inf files.
o
Insure the text file changes have no hidden characters or tabs. Windows installer cannot tolerate
malformed text strings and will fail with no informative message.
o
Insure that the original Storport.sy_ file is removed from the CDFolderPathName. Browse the new
ISO image to insure that the proper changes have been applied.