HP LD5535 55-inch LED Digital Signage Display - Manual (Page 39)

2. On the toolbar, click Message. The Message Setting dialog appears.
NOTE: If a display or display group has not been selected, the Message Setting dialog does not
appear. The message will remain on the display until one of the following actions happens locally at the
display.
Any action button on the IR Remote Control is pressed (Example: BACK, TILE, EXIT, INPUT, ARC/ MARK,
PSM, BRIGHTNESS, MENU, AUTO, USB, MUTE.)
A play list created with HP Network Sign Manager is playing and the next image is displayed.
A button on the display control panel is pressed.
3. Set the position, color, and content of the message displayed on the display. Each time the Message
Setting dialog box is launched, the text field will be blank. The message may include any alphanumeric
character and the following special characters – ! ( ) - + : , . / ?.
Item Description
Message Align Sets the position where the message is displayed by clicking on the appropriate button.
Message Color Selects a color of the message displayed. Selecting a different color will also
automatically change the color of the test message being displayed on the selected
display or display group in real time without having to press the SEND button
Message Send Enters the content of the message displayed. The counter indicates how many
characters you have used of the 60 characters allowed.
4. Click Send to send the created message.
Item Description
Send Displays the created message on the selected display or display group.
Clear Clears the text message on the selected display or display group.
Close Closes the Message Send dialog.
Alarm
Alarm is used to automatically send an alert email to the designated email address if an error is
detected during self-diagnosis. This function is activated when:
● The network connection is not normal (except for serial communication).
● An error in the lamp or temperature is detected during self-diagnosis.
● The ID or password is changed.
Before using this function, you need to configure the SMTP email settings. The following describes how to
configure the SMTP email:
Toolbar 33