HP LD5535 55-inch LED Digital Signage Display - Manual (Page 10)

OUT
IN
OUT
IN
OUT
IN
NOTE: The number of displays that can be connected by daisy chain to one media player/computer might
vary depending on the signal status and cable loss. If the signal status is good, and there is no cable loss, it is
possible to connect up to twenty-five displays in a daisy chain from one media player/ computer.
HP Network Sign Manager installation
Install HP Network Sign Manager on the media player/computer to be directly connected with the display or
to the network. HP Network Sign Manager installed on your media player/computer allows you to control the
display options and playback schedule.
Installing HP Network Sign Manager
1. Insert the HP Network Sign Manager and VOE Software CD, that comes with the display, into the CD-
ROM of the media player/computer. Choose HP Network Sign Manager. The HP Network Sign Manager
Installation Options screen appears.
2. Follow the instructions and screen prompts to install the software.
3. Click Next to continue the installation.
4. Select Destination Folder and then click Install to start the installation.
5. Click Show details to view the installation log after installation is complete.
Removing HP Network Sign Manager
The following steps describe how to uninstall HP Network Sign Manager from your computer:
1. Click Start, click All Programs, click HP Network Sign Manager, and then select Uninstall. The
HP Network Sign Manager Uninstall: Confirmation dialog appears.
2. Click Uninstall. The HP Network Sign Manager Uninstall: Completed window appears when the
HP Network Sign Manager program is successfully removed.
3. Click Close to close the dialog box.
Quick overview
HP Network Sign Manager supports monitoring, setting, and changing the HP digital signage display settings
in the On-Screen Display dialogs as well as settings and controls for HP Media Sign Player. All HP Network
Sign Manager functions are accessed from the home screen.
4 Installing HP Network Sign Manager