HP LD5535 55-inch LED Digital Signage Display - Manual (Page 36)

7. Set the start and end times between 00:00 and 23:59.
8. Click Option to adjust the slide time interval and the aspect ratio.
9. Select one of the options in the Slide Time drop-down list. You can set the slide time to 5, 10, or 30
seconds, and 1, 5, 10, 30, or 60 minutes.
10. Use the Aspect drop-down list to adjust the aspect ratio of photos and movies. Select Original to keep
the original aspect ratio; select Full to view in full screen mode. If you select Full, files will be scaled to
fit the screen. If the files are a different aspect ratio than 16:9, the image may be distorted when the
files are played in the slide show.
11. Click OK to complete the Play List schedule. The media files will be played on the display according to
the Play List schedule.
Toolbar
The toolbar has a collection of useful functions.
Search
Search searches the display(s) connected to the network and adds them to the Monitor Register
Window.
NOTE: Displays connected to serial communication will not be detected.
Setting
Setting allows you to set a communication method to connect to the signage display. You can
select either Network (Ethernet) or RS-232 serial communication depending on your environment.
30 Installing HP Network Sign Manager