HP ProLiant ML110 G4 Server - Manual (Page 10)

Using the Command Line Utility 10
Syntax
hrconf backup
Parameters
Controller# is the controller number.
Filename is the relative or absolute path with file name.
Example
hrconf backup 1 c:\windows\hr2200
Return values
SUCCESS: 0x00 indicates the command completed successfully.
FAILURE: 0x01 indicates the command failed.
hrconf create
This command creates logical drives. You must provide the channel and device ID of the physical drives. On
redundant logical drives, HRCONF performs autosynchronization.
Syntax
hrconf create LOGICALDRIVE [Options]
DRIVE#> [CHANNEL# DRIVE#] ... [noprompt]
Parameters
Controller# is the controller number.
Options indicates the logical drive with the following options:
• Stripesize—Optional parameters for specifying a stripe size in kilobytes. Values of16, 32, and 64 are
supported.
• Name—Optional parameter for specifying the name of the logical drive to be created.
• Init_Priority—Initialization priority for logical drive to be created. Valid parameters are HIGH, MED, or
LOW.
• Init_Method—Initialization method for the logical drive. Valid options are CLEAR and QUICK.
Size indicates the size of the logical drive. MAX is the only size option available.
RAID# indicates the RAID level for the logical drive (0, 1, 10 volume).
Channel# is the channel number for the device.
Drive# is the device number for the device.
noprompt : No prompt for confirmation.
Example
hrconf create 1 logicaldrive stripesize 64 max 0 1 0 1 1 1 2
Return values
SUCCESS: 0x00 indicates successful termination.
FAILURE: 0x00 indicates a bad arguments or internal error.
hrconf delete
This command deletes a logical drive. All data stored on the logical drive will be lost.
Syntax
hrconf delete LOGICALDRIVE [noprompt]
Parameters
Controller# is the controller number.
LogicalDrive# is the number of the logical drive to be deleted.
noprompt : No prompt for confirmation.