Install the copy connect eio board – HP LaserJet 8100 Multifunction Printer series User Manual
Page 35
Chapter 1
HP Digital Copy
35
HP Digital Copy Installation
Install the Copy Connect EIO Board
CAUTION
Make sure that the printer is turned off.
Inser t the Copy Connect EIO Board that came with the HP Digital Copy into an
open EIO slot on the printer. (Use the screws that are in the existing EIO cover
to install the Copy Connect EIO Board.)
Note
If a cover is on the open slot, use a screwdriver to remove the two screws.
Remove the cover and install the Copy Connect EIO Board.
This manual is related to the following products: