HP 3PAR Operating System Software - Manual (Page 16)

5 Troubleshooting the Peer Motion Manager Software
Source System Host Configuration Issues
Many source system host configuration issues can be identified with the user interface. From the
Main Menu, select option 2 ==> Analyze Migration Links. Then select option 2 ==> Analyze Source
Array Host Ports and Host Configuration from the Analyze Migration Links Menu.
Problem
No WWN. The host that represents the destination system has no WWN assigned.
Solution
Use the showhost CLI command to verify the host is created. Use the createhost CLI command
to create the host on the system.
Problem
Invalid WWN. The host that represents the destination system has an invalid WWN assigned.
Solution
Use the showhost command to verify you have the correct WWN.
Problem
Not Configured. The host that represents the destination system is not configured.
Solution
This state is not a problem. The hosts have not yet been configured on the source.
Problem
Invalid Configuration.
Solution
The host that represents the destination system has an invalid configuration status. For example,
the host name doesn't match destination system name.
Problem
Unsupported host persona. The host that represents the destination system has an unsupported host
persona.
Solution
The host persona must be 1 (Generic) or 2 (Generic-ALUA). Use the sethost CLI command to
change the host persona.
Problem
Unknown. The host that represents the destination system has an unknown status.
Solution
Use the showhost CLI command to verify the host is created on the source system. Use the
createhost
CLI command to create the host on the system.
16 Troubleshooting the Peer Motion Manager Software