HP Compaq 515 Notebook-PC - Manual (Page 15)

5 RAID volume setup
The following instructions assume that a supported HDD is installed in the computer Upgrade Bay, in
the SATA swappable bay of the docking station, or connected to the eSATA port of the notebook PC
(see
Devices supported on page 6 ).
The basic RAID migration steps are as follows:
● Enable RAID through the system BIOS.
● Initiate RAID migration using the Intel® Matrix Storage Console.
CAUTION: Make sure that the notebook PC is connected to AC power before initiating the following
procedures. The loss of power during RAID migration can result in the loss of data.
11