Passwords set in the setup utility, Administrator password, Managing an administrator password – HP Pavilion dv5221tx Notebook PC User Manual
Page 140
Passwords set in the Setup Utility
Passwords
Function
Administrator password*
●
Protects access to the Setup Utility.
●
After this password is set, it must be entered each time you access the
Setup Utility.
CAUTION
If you forget the administrator password, you cannot
access the Setup Utility.
Power-on password*
●
Protects access to the computer contents.
●
After this password is set, it must be entered each time you turn on the
computer, restart, or restore from hibernation.
CAUTION
If you forget your power-on password, you cannot turn on
the computer, restart, or restore from hibernation.
*For details about each of these passwords, refer to the following sections.
Administrator password
The administrator password protects the configuration settings and system identification information
in the Setup Utility. After this password is set, you must enter it each time you access the Setup Utility.
The administrator password
●
Is not interchangeable with an administrator password set in Windows.
●
Is not displayed as it is set, entered, changed, or deleted. Make sure you record your password
and store it in a secure place.
Managing an administrator password
To set, change, or delete this password:
1.
Open the Setup Utility by turning on or restarting the computer, and then pressing
f10
while the
setup message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Security > Administrator Password, and then press
enter
.
●
To set an administrator password, type your password in the Enter New Password and
Confirm New Password fields, and then press
enter
.
●
To change an administrator password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press
enter
.
●
To delete an administrator password, type your current password in the Enter Current
Password field, and then press
enter
4 times.
3.
To save your preferences and exit the Setup Utility, press
f10
, and then follow the instructions
on the screen.
Your preferences go into effect when the computer restarts.
130
Chapter 11 Security
ENWW