HP StorageWorks 2.32 Edge Switch - Manual (Page 73)

Setting Up the Application
73 HA-Fabric Manager User Guide
Figure 27: Domain Information dialog box (Community Strings tab)
5. Click an option in the Read field.
— Choose Default ‘public’ to select the default string.
— Choose Custom to specify a custom string.
6. Click an option in the Write field.
— Choose Default ‘private’ to select the default string.
— Choose Custom to specify a custom string.
7. If you chose Custom in step 5 or step 6 , continue to step 8 . Otherwise, skip to
step 10 .
8. Enter the custom string in the Custom field.
9. Enter the string again in the Confirm Custom field.
10. Click OK.
11. Click OK to close the Discover Setup dialog box.
Reverting to a Default Community String
1. Choose Discover > Setup. The Discover Setup dialog box displays, as shown
in Figure 25 on page 70.
2. Highlight an IP address from the Available Addresses table.
3. Click Add. The Domain Information dialog box displays, as shown in
Figure 26 on page 71.
4. Click the Community Strings tab. The Community Strings tab displays, as
shown in Figure 27 on page 73.
5. Click Default ‘public’ and Default ‘private’.
6. Click OK.