HP StorageWorks 2.32 Edge Switch - Manual (Page 143)

Optional Features
143 HA-Fabric Manager User Guide
6. Enter a description in the Description parameter’s value.
7. To insert a macro for values from the trigger’s content, perform the following:
a. Click in the Value column.
b. Right-click and choose an argument from the menu.
8. Click Add.
Specifying a Message Action
You can configure the application to display a pop-up message on all open clients
when the specified trigger is fired. You can choose to display either informational,
warning, or fatal icons in the message. The title bar displays the rule number, rule
name, and “message.” For example, “Rule 23 Switch Offline Message.” The time
and date are automatically inserted and multiple messages display in a single
pop-up window.
Note: Before specifying an action, you should specify the rule’s triggers. See “ About
Triggers ” on page 128 for instructions.
1. Click the Event Management tab on the main window. The Event
Management tab displays, as shown in Figure 69 on page 133.
2. Click New. The Add Rule dialog box displays, as shown in Figure 70 on
page 134.
3. Choose Message from the Actions list at the bottom left side of the dialog
box. The Message information displays, as shown in Figure 77 .