HP StorageWorks 2.32 Edge Switch - Manual (Page 135)

Optional Features
135 HA-Fabric Manager User Guide
11. Use the buttons to the right of the Trigger area to organize the syntax of the
trigger.
— Click the up and down arrows to move selected phrases up and down in
the table.
— Click Delete to remove selected rows from the table.
— Click the parenthesis buttons to add parentheses to selected phrases.
— To delete a parenthesis, highlight the parenthesis and click Delete.
12. Enter time limits for the event trigger, see “ Specifying Time Limits for an
Event Trigger ” on page 135.
13. Choose an action from the Actions list at the bottom left of the dialog box.
For help with adding specific actions, see “ Event Management Component
Overview ” on page 128.
14. Enter the required information in the Value column for each listed parameter.
15. Click Add. The action you configured displays in the Actions area in the top
half of the dialog box.
16. Repeat step 13 through step 15 to add more actions.
17. Use the buttons to the right of the Actions area to move the action phrases up
or down.
— Click Delete to remove selected rows from the table.
— Click the up and down arrows to move selected actions up and down to
change the order in which the actions are started.
18. Click OK.
Specifying Time Limits for an Event Trigger
Time limit triggers are used to specify times during which an event trigger should
be fired. For example, you may specify that all offline events between 5PM and
8AM trigger e-mail message and log actions to take place. Thus, the application
sends an e-mail to notify users of the event and adds a second, more detailed entry
to the master log.
1. Click the Event Management tab on the main window. The Event
Management tab displays, as shown in Figure 69 on page 133.
2. Click New. The Add Rule dialog box displays, as shown in Figure 70 on
page 134.