Power light is on or flashing, What the flashing light means, If an error message appears – HP Deskjet D2345 Printer User Manual
Page 76
"Two-way communication cannot be established" or "Printer not responding"
message
The printer might not be able to communicate with the computer if the USB cable is too
long.
If you receive this error message, make sure that the USB cable is not greater than 3
meters (approximately 9.8 feet) in length.
Note
For best printing performance, use a USB 2.0 compatible cable.
Power light is on or flashing
1 Power light
●
If the Power light is on, the printer is either printing or ready to print.
●
If the Power light is off, the printer is off.
●
If the Power light is flashing, see the following information.
●
●
●
What the flashing light means
The Power light can flash for several reasons:
●
The printer cover is open.
●
The printer is out of paper.
●
A problem exists with the printer, such as a paper jam or a problem with a print
cartridge.
For information about clearing a paper jam, see
.
If an error message appears
Read the error message that explains the problem and its solution.
Chapter 11
74
HP Deskjet D2300 series