HP HD-5210 Webcam - Manual (Page 11)

HP Webcam HD 5210 User’s Guide 7
Recording a Video
1 Do either of the following to open ArcSoft WebCam Companion and enter
capture mode:
Press the Video Record button on your webcam.
Double-click the HP Webcam Control Center icon on the Windows
desktop, and then click Record Video .
2 (Optional) Click Full Screen to record in full-screen mode.
3 (Optional) Click the resolution list below the icons in the upper-right corner, and select
the resolution setting you want to use for the recording. The default setting is
1280x720 (HD 720p), which provides optimum performance in most environments.
4 Press the Video Record button or click Record Video to
begin recording.
5 Press the Video Record button again or click Stop Recording to stop
recording and save the video to your PC.
6 If you’re recording in full-screen mode, click the Exit icon on the right side of the
screen to return to partial-screen mode.
To learn more about using ArcSoft WebCam Companion, click Extras and select
Application Help.
NOTE: Higher resolutions and/or poor lighting may slow down the frame rate and
make the video jerky. For more information on resolution issues, see
“Troubleshooting.”