HP Jetdirect 175x Print Server series - Manual (Page 102)

Check the print server’s I/O status.
for HP Jetdirect 175x external print server/Internet connector for USB
and HP Jetdirect 310x external print server/Internet connector for USB
Check the I/O status of the print server by following these steps:
1. Print a Jetdirect configuration page. To print the page, press the test button on the print
server.
test button
If the configuration page does not print or is unreadable, click here for help in getting it to print.
2. On the configuration page, check that the print server reports its status as “I/O Card Ready”. The
Status entry is the first entry in the General Information section, in the upper left portion of the
page.
Status entry