HP Compaq 320 Notebook-PC - Manual (Page 143)

Select To do this
Port Options NOTE: All port options are enabled by default.
● Enable/disable the serial port (select models only).
● Enable/disable the parallel port (select models only).
● Enable/disable the flash media reader.
● Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
● Enable/disable the 1394 port (select models only).
● Enable/disable the ExpressCard slot.
● Enable/disable the eSATA port.
AMT Options (select models only). NOTE: All AMT options are disabled by default.
● Enable/disable firmware verbosity.
● Enable/disable AMT setup prompt (Ctrl-P).
● Enable/disable USB key provisioning support.
● Enable/disable unconfigure AMT on next boot.
● Select terminal emulation mode. Options include the
following:
◦ ANSI (default setting)
◦ VT100
● Enable/disable firmware progress event support.
● Enable/disable initiate Intel CIRA.
Set Security Level Change, view, or hide security levels for all BIOS menu
items.
Restore Security Defaults Restore the default security settings.
Computer Setup menus 131