HP OmniBook 5700 Notebook PC - Manual (Page 29)

Troubleshooting
Solving Problems
1-29
Solving Problems
If you have a problem using the docking system, find the symptom that matches
your situation. Try the suggestions one at a time.
If the OmniBook won’t undock after you press the Undock button
•
Make sure the OmniBook is turned on.
•
If you’re using a password, make sure it’s accepted.
•
If you’re prompted about shutting down devices, and if no applications are
using those devices, press
ENTER . Otherwise, close those applications and try
undocking again.
•
Reboot the system and try again.
•
Remove the ac adapter and let the docking system rest for 30 seconds or so,
then reset and attach the ac adapter
•
To manually undock the OmniBook, press a key or other thin object into the
security opening in the docking system. The docking system releases the
OmniBook. Always reset the OmniBook after manually undocking.