HP OmniBook 5700 Notebook PC - Manual (Page 22)

Using the Docking System
Making Connections
1-22
2. Move the speaker switch to the up position to enable both the OmniBook’s
internal speakers and the external speakers.
–or–
Move the speaker switch to the down position to disable the internal speaker.
Microphone or external audio source (such as a CD player)
•
Attach an amplified microphone to the line-in (1) connector.
•
Attach an external audio source to the audio-in (2) connector.
To connect SCSI devices
SCSI devices are disabled whenever you turn off the system or undock.
1. Make sure that each SCSI device is set to a unique SCSI ID number, ID 1 through
ID 6. Do not use ID 0. See the device’s documentation for instructions for
checking and changing the device’s ID.
2. Set the SCSI bus termination for each device.
The device at the end of the SCSI bus must be terminated, while the devices in
the middle of the bus must have their terminators removed or disabled. The
device’s documentation describes how to check and change the termination.
3. Connect the peripheral devices to the docking system one after the other—a
“daisy-chain” connection.
4. Plug each SCSI device into a proper electrical outlet. See the device
documentation for details.
If up, internal
speaker enabled.
If down, internal
speaker disabled.
audio-in connector (2)
line-in connector (1)