HP OmniBook 5700 Notebook PC User Manual
Page 24
Using the Docking System
Making Connections
1-24
4. Unscrew and remove the slot cover next to the card slot you want to use.
5. Slide the card firmly into the connector and replace the slot cover screw.
Important If you have already installed a PCI card, you can install only one ISA
card—and it must be in the lower ISA slot.
6. Replace the shield.
7. Plug in the ac adapter.
8. Replace the cable cover and dock the OmniBook.
9. If you’re using Windows for Workgroups.
Install the software for the card following the manufacturer’s instructions. If the
card isn’t detected, contact the card manufacturer.
–or–
If you’re using Windows 95
If the card isn’t detected, in Control Panel double-click Add New Hardware.
Important News for
Windows 95 Users
If you are using Windows 95, you’ll need to remove the card you added from the
undocked configuration. See the following procedure.
ISA cards
PCI card