HP OmniBook 5500 Notebook PC - Manual (Page 22)

22
If the reset button has no effect, remove the battery and ac adapter and press
the reset button—then install the battery or plug in the ac adapter and try
pressing the reset button again.
Using Storage Devices
Your OmniBook can access information in the following four places:
• The floppy disk drive—drive A (if present).
• The internal hard disk drive—drive C.
•
Two PC card slots—drives D and E.
• The CD-ROM drive—drive F (if present).
The PC card slots and the CD-ROM drive have higher drive letters when a SCSI
hard drive is present—as with a docking system.
In this section you’ll learn how to
• Install a floppy disk drive.
• Remove the CD-ROM or floppy drive.
• Insert and remove a floppy disk.
• Install a CD-ROM drive.