Avocent Advanced Console Server ACS 6000 - Manual (Page 15)

Chapter 1: Introduction, Navigation and Commands 5
A prompt like the following appears at each level:
--:- appliance_settings cli->
NOTE: CLI commands are case sensitive.
At any level, you can press Tab Tab at the prompt to see the commands that can be entered at the
current level.
---:- appliance_settings cli->< Tab><Tab>
? del ls quit set
add exit opiepasswd refresh shell
cd ftp passwd revert show
commit help pwd scp
If you know the path, you can enter multiple path elements in a single command separated with
forward slashes (/).
--:- units cli-> cd appliance_settings/ports/physical_ports/serial_ports/
--:- serial ports cli->
Enter cd .. to move up one level of the navigation tree. Enter cd ../.. [ /.. ] to move up multiple levels.
--:- serial ports cli-> cd ../..
--:- ports cli->
Autocompletion
Autocompletion allows you to type the first few letters of a command or navigation option and then
press
Tab . The rest of the name is filled in automatically if the letters typed are unique to one
command or to a navigation option at that level. If the letters match more than one of the
commands or navigation options for that level, the matching options are listed.
For example, if you type cd ov and press Tab at the CLI prompt from the /units level, the overview
option will be completed.
--:- units cli-> cd ov
--:- units cli-> cd overview
If you then press Enter , you are changed to the overview level, and the overview level prompt
appears.
--:- overview cli->
The following example illustrates a case when more than one command matches the letters typed.
--:- units cli-> sh
shell show