HP ProBook 5320m Notebook PC - Manual (Page 75)

Removing DriveLock protection
To access the DriveLock settings in Computer Setup, follow these steps:
1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
“F10 = ROM Based Setup” message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select Security > DriveLock passwords, and then press enter .
3. Use the arrow keys to select the location of the internal hard drive, and then press f10 .
4. Use the arrow keys to select Disable in the Protection field, and then press f10 .
5. Type your master password in the Old password field. Then press f10 .
6. To save your preferences, use the arrow keys to select File > Save changes and exit. Then follow
the instructions on the screen.
Your preferences go into effect when the computer restarts.
Using passwords 65