HP Módulo de conexión virtual HP FlexFabric de 10 Gb24 puertos para BladeSystem clase-c - Manual (Page 10)

#------------------------------------------------------------------------
# This is my sample Virtual Connect Domain Configuration Script
# Revision 1.0.1.2
# February 15, 2013
#------------------------------------------------------------------------
# Add Users
add user SomeNetworkUser password=pass1 role=network
add user SomeStorageUser password=pass2 role=storage
add user SomeDomainUser password=pass6 role=domain
add user SomeAdminUser password=pass3 role=*
add user DomainNetworkUser password=764dhh role=domain,network
# Add Profiles with Default VC-Enet and VC-FC Connections
add profile MyProfile
add profile AnotherProfile
add profile Profile45
# Add VC-Enet Networks
add network MyNetwork
add network Network2
# Add uplink ports to the networks
add uplinkport enc0:1:1 network=MyNetwork
add uplinkport enc0:1:2 network=Network2
# Create a Shared Uplink Port Set
add uplinkset SharedSet1
# Add a new FCoE SAN fabric connection to a profile
add fcoe-connection MyNewProfile Fabric=SAN_5
# Reset the active QoS configuration type to the factory default settings
but does not change the saved configuration types
reset qos -active
# Set the domain default LACP timer to the short setting (one second)
set lacp-timer default=Short
# Add a Multicast Filter "filter1" to Filterset "mfs1"
add mfs-filter FilterSet=mfs1 McastFilter =filter1
ESES Uso de comentarios y líneas en blanco en las secuencias de comandos de la CLI 3