Manually ejecting disks – HP 2600fx Optical Disk Drive User Manual

Page 30

Text mode
Original mode

3-4

Manually Ejecting Disks

The optical disk drive does not automatically eject an optical disk if a power
failure occurs. An eject tool is shipped with the optical disk drive to use for
manually ejecting a disk.

Follow these steps to manually remove a disk from the optical drive:

Disconnect all power to the drive.

Insert the eject tool into the small round hole in the front panel of the

drive, push the eject tool firmly, and the disk will eject.

Note

After ejecting a disk, the drive remains in “eject position” until power is restored. At that
time, the drive automatically resets itself.