Actiontec electronic MI408 - Manual (Page 129)

126
Actiontec Broadband Router User Manual
127
Appendix A Quality of Service
1. Click Quality of Service at the top of the Home screen, then click DSCP
Settings. The “ DSCP Settings” screen appears.
2. To edit an existing entry, click the appropriate icon in the “Action” column.
To add a new entry, click Add. In either case, the “Edit DSCP Settings” screen
appears.
3. Configure the following parameters:
DSCP Value (hex) - Enter the DSCP value as a hexadecimal value.
802.1p Priority - Select a 802.1p priority level from the drop-down list, zero
being the lowest and seven the highest (each priority level is mapped to low/
medium/high priority). The default
DSCP value for packets with an unassigned
value is zero.
4. Click Apply to save the settings.