LG PQNFB16A1 - Manual (Page 15)

BNU-LW remote diagnosis function
Installation Manual 15
ENGLISH
1. Connect the LAN line between the PC
and the LAN port of the BNU-LW.
2. Set the network IP of the used PC to
192.168.1.xxx (except 101).
3. Enter 192.168.1.101 in the Internet
Explorer.
4. The above picture is shown when
connected normally.
• Initial ID: lonwork
• Initial password: lonwork
• Enter the total number of connected
indoor units in the Total Unit block.
BNU-LW remote diagnosis function
Setting method
LAN(cross cable)