LG LC903P-B User Manual
Color video camera, Important safety instructions, Power supply
OWNER'S MANUAL
Color Video Camera
Please read this manual carefully before operating
your set and retain it for future reference.
P/NO : MFL66987626
MODEL
LC903
LC902
LC901
Important Safety Instructions
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-
over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Power Supply
This camera must be operated DC 12 V Certified/Listed, class 2 power supply
only.
Handling of the unit
Be careful not to spill water or other liquids on the unit. Be cautious not to get
combustible or metallic material inside the body. If used with foreign matter
inside, the camera is liable to fail or to get cause of fire or electric shock.
•
Remove dust or dirt on the surface of the lens with a blower.
•
Use a dry soft cloth to clean the body. If it is very dirty, use a cloth damp-
ened with a small quantity of neutral detergent then wipe dry.
•
Avoid the use of volatile solvents such as thinners, alcohol, benzene and
insecticides.
They may damage the surface finish and/or impair the operation of the
camera.
Operating and storage location
Avoid viewing a very bright object (such as light fittings) during an extended
period. Avoid operating or storing the unit in the following locations.
•
Extremely hot or cold places (operating temperature
-10 °C to 50 °C, however, we recommend that the unit be used within a
temperature range of 0 °C to 45 °C)
•
Damp or dust place
•
Places exposed to rain
•
Places subject to strong vibration
•
Close to generators of powerful electromagnetic
radiation such as radio or TV transmitters.
Specification
ITEM
LC901N
LC902N
LC903N
LC901P
LC902P
LC903P
Signal System
NTSC
PAL
Total Pixels No.
811 (H) X 508 (V)
795 (H) X 596 (V)
Image Device
4.5 mm EX-View CCD
Lens
x37 Zoom ( F1.5 (Wide End) , F4.1 (Tele End) )
( f = 3.5 mm to 129 mm )
IRIS Control
DC IRIS
Sync. System
Internal
Scanning Frequency (H)
15.734 kHz
15.625 kHz
Scanning Frequency (V)
59.94 Hz
50 Hz
Horizontal Resolution
More than 540 TV Lines
S/N Ratio
More Than 50 dB (AGC Off )
Minimum
Illumination
Color
Mode
0.003
(0.6) lx
(Sens-
up OFF)
0.6 lx
0.003
(0.6) lx
(Sens-
up OFF)
0.003
(0.6) lx
(Sens-
up OFF)
0.6 lx
0.003
(0.6) lx
(Sens-
up OFF)
B/W
Mode
0.0001
(0.1) lx
(Sens-
up OFF)
0.1 lx
0.0001
(0.1) lx
(Sens-
up OFF)
0.0001
(0.1) lx
(Sens-
up OFF)
0.1 lx
0.0001
(0.1) lx
(Sens-
up OFF)
Video Output Signal
1 Vp-p Composite (75 Ω)
Control Method
RS-485
Auto Gain Control
Off / Low / Medium / High
Day & Night
Day / Night / Auto / EXT
Electronic Shutter
1/60 to 1/90 000
1/50 to 1/90 000
White Balance
Auto / ATW / ONE PUSH / Manual
Electronic Sensitivity
OFF / Auto
ITEM
LC901N
LC902N
LC903N
LC901P
LC902P
LC903P
WDR (BLC)
OFF /
BLC /
HSBLC
OFF /
WDR /
BLC
OFF /
WDR /
BLC /
HSBLC
OFF / BLC
/ HSBLC
OFF /
WDR /
BLC
OFF /
WDR /
BLC /
HSBLC
Motion detection
On / Off
Privacy Zone Masking
8 Zones
Power Source
DC 12 V ± 20 %
Power Consumption
4.4 W
Operation Temp. /
Humidity
-10 ºC to 50 ºC / 0 % RH to 80 % RH
Storage Temp. /
Humidity
-20 ºC to 60 ºC / 0 % RH to 85 % RH
Weight
520 g
Dimension (H x V x D)
64 mm x 78.6 mm x 118.2 mm
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
FCC WARNING: This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
•
A suitable conduit entries, knock-outs or glands shall be provided in the
cable entries of this product in the end user.
•
Caution: Danger of explosion if battery is incorrectly replaced. Replaced
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
•
Holes in metal, through which insulated wires pass, shall have smooth well
rounded surfaces or shall be provided with brushings.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Warning: Do not install this equipment in a confined space such as a bookcase
or similar unit.
Warning: Wiring methods shall be in accordance with the National Electric
Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
Warning: To reduce a risk of fire or electric shock, do not expose this product to
rain or moisture.
Caution: This installation should be made by a qualified service person and
should conform to all local codes.
Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
Caution: The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
To disconnect power from mains, pull out the mains cord plug. When
installing the product, ensure that the plug is easily accessible.
LG Electronics hereby declares that this/these product(s) is/are in
compliance with the essential requirements and other relevant
provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere,
The Netherlands (Tel : +31-(0)36-547-8888)
Disposal of your old appliance
1.
When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the European
Directive 2002/96/EC.
2.
All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3.
The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4.
For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
EEE Compliance with Directive. (for Turkey only)
AB28