Asus AP3000 - Manual (Page 29)

29
IV. Hardware Setup
IV
. Hardware Setup
AP 3000 Hardware Reference Guide
Hot-Swap Bay
Hot-Swap Bay
To remove the hot-swap bay, release the front cooling fans first by
pressing the eject mechanism with a small screwdriver. Remove the
six retaining screws as circled above and then the entire hot-swap
bay can be slid out of the chassis.
Hot-Swap Tray
There are two levers on the front of the hot-swap tray to help release
or lock the tray. To remove the tray, extend both levers and pull on
both levers. To install the tray, push the tray firmly into the bay with
the levers extended, then close the levers.
1
2
3
4
5