LG CF3D - Manual (Page 29)

Function
29
* 3D video is video from two separate cameras interwoven together. If the luminance of each frame is not the
same, you may notice some flickering. This setting will help equalize the luminance of each frame.
1. Press the MENU button. Then, move to OPTION with the
∧ , ∨, ＜, ＞ buttons and press the ◉OK button.
2. Press the ∧, ∨ buttons to move to Camera Calibration
and press the ◉OK button.
3. Press the ＜, ＞ buttons to move to On.
4. Press the ∧, ∨ buttons to move to Calibration Start and
press the ◉OK button.
• The value input on Camera Calibration applies only to 3D video. It doesn't apply to 2D video.
• When the surrounding lighting is too bright the illumination adjustment may not work properly.
• It operates 5 minutes after the power is turned on.
• Press the
BACK button to exit the menu screen.
To Calibrate the Camera
OPTION
Menu Language : English
Blank Image : Blue
Camera Calibration ꔉ
Lamp Mode : Normal
High Altitude
Network Setting
3D Mode
Input Label
Power Sound
: On
ꔂMove ꔉOK
1. Press the Q.MENU button on the remote control.
2. Press the ＜, ＞ buttons to move to Lamp Mode.
3. Move to a desired item with the ＜, ＞ buttons.
• This function is not available in 3D mode or when the lamp is over 35°C.
• You can use this function through the
MENU button.
• Press the BACK button to exit the menu screen.
To Adjust the Brightness of the Lamp
Lamp Mode
Economic
ꔗ On ꔃ
Calibration Start
Close
Camera