LG CF3D - Manual (Page 15)

Installing and Composition
15
Selecting Input Mode
• Selecting an input signal with the VIDEO, COMP, RGB, HDMI1, HDMI2 and HDMI3 buttons.
• Connected input list is displayed in front.
Input
Component Video RGB HDMI 1 HDMI 2 HDMI 3
When an image appears on the screen, check if it is in focus and fits the screen properly.
When you need to move the screen image up or down, use the zoom ring on the projector to adjust the height as shown
below.
• To adjust the focus of the image, rotate the focus ring.
• To adjust the size of the image, rotate the zoom ring.
• Turn the Lens shift dial left or right to adjust the projector image up or down.
• Turning the Lens shift dial with excessive power may cause damage to the projector.
Focus and Position of the Screen Image
Focus Ring
Zoom Ring
Lens shift Dial
1. Press the INPUT button.
2. The menu will cycle between active inputs when you press the INPUT button. Use the ＜, ＞ button to switch
between inputs that are not active.