LG HX350T - Manual (Page 22)

22
Operating the Projector
SCREEN Menu Options
To Change PJT Mode
* This function turns the projected image upside down or flips horizontal.
Press the RATIO button to select a desired screen size.
Using Aspect Ratio Function
• Some options may not be available depending on input signals.
• You can also use this function through the
MENU button.
• Press the BACK button to exit the menu screen.
1 . Press the KEY.S ꔌ, KEY.Sꔍ button of remote control.
2 . Press the KEY.S ꔌ, KEY.Sꔍ button to adjust the screen condition as
you want.
• Keystone can be adjusted from -40 to 40.
• You can also use this function through the
MENU button.
• Press the BACK button to exit the menu screen.
Using Keystone Function
* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystone function when you can’t get the best angle by moving the projector.
•Keystone 0 ꔗ ꔃ
ꔉOK
- +
CH
PJT Mode
Front
CH
Aspect Ratio
16:9
1 . Press the Q.MENU button on the remote control.
2 . Press the ＜, ＞ buttons to move PJT Mode.
3 . Press the ∧, ∨ button to select a desired item.
• Select Rear when projecting from the back of the transparent screen purchased separately.
• Select Ceiling when installing the product on the ceiling.
• When PJT Mode is Rear/Front Ceiling, the left/right of the speaker changes automatically.
• You can also use this function through the MENU button.
• Press the BACK button to exit the menu screen.
4:3 Set By Program Just Scan
Cinema Zoom1 16:9 Zoom