Turning on the projector, Turning off the projector, Focus and position of the screen image – LG HX350T User Manual

Page 14: Selecting input mode, Input

Installation

Selecting input mode

1 . Press the

INPUT button on the remote control.

2 . Selecting an input signal with the

INPUT button will only change the projector only to connected inputs. You

can change it to any inputs with the

＜, ＞ button.

• The component input is always active.
• You can also use this function through the

MENU button.

Input

Video

Component

RGB-PC

HDMI

Turning on the Projector

1 . Make sure the power cord is connected correctly.

2 . After wait for a moment, press the

POWER button on the top cover or the POWER button on the remote

control. (The light on the control panel will be turned on.)

• Press the

INPUT button on the remote control to select the input signal you want.

• When you press the

POWER button on the remote control or the POWER button on the control panel when you

turn on the projector, the lights for

POWER and MENU buttons on the control panel will be turned on.

• Check if the lens door is open before turning on the power.

Turning off the Projector

Press the

POWER button on the top cover or the POWER button on the remote control.

When an image appears on the screen, check if it is in focus and fits the screen properly.

• To adjust the focus of the image, rotate the focus ring.

Focus ring

Focus and Position of the Screen Image