Operating the projector, Channel menu options, Channel setup - auto scan – LG HX350T User Manual

Page 17: Channel selection, Add/delete channel

Operating the Projector

CHANNEL Menu Options

Operating the Projector

* The On-Screen Display (OSD) in this manual may be slightly different from your projector.

Channel Setup - Auto Scan

Add/Delete Channel

* When selecting DTV or CADTV input signal in the Manual Tuning menu, you can view the on-screen signal strength monitor

to see the quality of the signal being received.

* Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.

Run this function if you change your residence or move the projector. Also, make sure to run this function with the antenna

connected during projector broadcasting hours.

Auto Tuning memorizes only the channels available at the time.

ꔂMove ꔉOK

CHANNEL

Auto Turning

Manual Turning
Channel Edit

ꔂMove ꔉOK

CHANNEL

Auto Turning

Manual Turning

Channel Edit

1 . Press the

MENU button. Then, move to CHANNEL with the

∧, ∨,

＜, ＞ buttons and press the ◉OK button.

2 . Press the

∧, ∨ buttons to move Auto Turning and press the ◉OK

button.

3 . Press the

∧, ∨ buttons to move Yes and press the ◉OK button.

• When setting the

Auto Tuning or Manual Tuning, the number of maxi-

mum channels you can store is 1000. It is subject to change depending
on the broadcasting signal environment.

• Memorizes all the available channels in the order of DTV, TV, CADTV and CATV.
• Press the

BACK button to exit the menu screen.

1 . Press the

MENU button. Then, move to CHANNEL with the

∧, ∨,

＜, ＞ buttons and press the ◉OK button.

2 . Press the

∧, ∨ buttons to move Manual Turning and press the

◉OK button.

3 . Press the

＜, ＞ buttons to move DTV, TV, CADTV, or CATV and

press the

∨ button.

4 . Press the

＜, ＞ buttons to move channel you want to add or delete.

5 . Press the

∨ buttons to move Add or Delete and press the ◉OK button.

• Press the

BACK button to exit the menu screen.

Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.

Start

Channel

Select channel type and

RF-channel number.

◀

DTV

▶

Delete

DTV 2-1

Bad Normal Good

Press the

∧, ∨ or Number 0 - 9 buttons to select a channel number.

Channel Selection