APC SYMMETRA 990 - Manual (Page 31)

Troubleshooting: Alarm Types
Symmetra MW with External Bypass Static Switch Operation Manual - 990-1377D-001 27
The Param (Parameter) column is used to associate an event with a specific component. Should there be
data relevant to a particular event, it will be displayed in the Data column e.g. if a temperature threshold
was exceeded, the actual temperature at the time the event occurred may be shown.
• Refresh: Press the Refresh button to update the
Event Log.
• Stop (only visible during update): Press this
button to stop further downloading of the event
log. This button is useful for viewing only the
most recent events.
• E-mail Event Log: Press this button to e-mail
the event log to a specific e-mail address. Type
in the e-mail address and press Send.
Note: Network settings and E-mail settings must be enabled and configured correctly before
the event log can be e-mailed.