14 me subsystem, 15 legacy devices configuration, Serial port 1/2 configuration – Asus Z9PR-D12 User Manual
Page 97: Serial port [enabled, Device mode [standard serial port mode
ASUS Z9PR-D12 Series
4-35
4.4.14 ME Subsystem
Intel ME Subsystem Configuration
ME BIOS Interface Version 1.2
ME Version
2.1.5.69
ME FW Status Value :
0xf0345
ME FW State :
SPS ME FW Active
ME FW Operation State:
M0 without UMA
ME FW Error Code:
No Error
ME Ext FW Status value:
0x3000e301
BIOS Booting Mode:
Performance Optimized
Cores Disabled:
0
ME FW SKU Information:
SiEn NM
→←:
Select Screen
↑↓:
Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ME Subsystem Help.
4.4.15 Legacy Devices Configuration
Serial Port 1 Configuration
Serial Port 2 Configuration
Serial Port 1/2 Configuration
Serial Port Configuration
Serial Port
[Enabled]
Device Settings
I0=3F8h; IRQ=4
Device Mode
[Standard Serial Po..]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Set Parameters of serial
Port 1(COM1).
Enable or Disable Serial
Port(COM).
Serial Port [Enabled]
Allows you to enable or disable the serial port.
Configuration options: [Disabled] [Enabled]
Device Mode [Standard Serial Port Mode]
Allows you to change the serial port mode.
Configuration options: [Standard Serial Port Mode]