Asus Z9PR-D12 - Manual (Page 54)

2-34 Chapter 2: Hardware information
11. EATX power connectors
(24-pin EATXPWR1, 8-pin EATX12V1/EATX12V2)
These connectors are for the EATX power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation. Find the
proper orientation and push down firmly until the connectors completely fit.
• DO NOT forget to connect the 24+8+8-pin power plugs. Otherwise, the
system will not boot up.
• We recommend that you use a PSU with a higher power output when
configuring a system with more power-consuming devices. The system may
become unstable or may not boot up if the power is inadequate.
• This motherboard supports EATX2.0 PSU or later version.
• Ensure that your power supply unit (PSU) can provide at least the minimum
power required by your system.