Asus Z9PR-D12 User Manual

Page 45

ASUS Z9PR-D12 Series

2-25

4. LSI MegaRAID or Intel RSTe selection jumper (3-pin RAID_SEL1)

This jumper allows you to select the PCH SATA RAID mode to use LSI

MegaRAID software or Intel

Rapid Storage Technology enterprise 3.0 RAID.

Place the jumper caps over pins 1–2 if you want to use the LSI MegaRAID

software RAID Utility (default). Otherwise, place the jumper caps to pins 2–3

to use the Intel

Rapid Storage Technology Enterprise Option ROM Utility.

5. ME firmware force recovery setting (3-pin ME_RCVR1)

This jumper allows you to force Intel Management Engine (ME) boot from

recovery mode when ME become corrupted.