beautypg.com

6 pci subsystem settings, Pci subsystem settings -23, Pci rom priority [efi compatible rom – Asus Z9PR-D12 User Manual

Page 85: Pci latency timer [32 pci bus clocks, Vga palette snoop [disabled, Perr# generation [disabled, Serr# generation [disabled, Load rt32 image [disabled

background image

ASUS Z9PR-D12 Series

4-23

4.4.6

PCI Subsystem Settings

In case of multiple Option

ROMs (Legacy and EFI

Compatible), specifies what

PCI option ROM to lanuch.

PCI Bus Driver Version

V 2.05.00

PCI Option ROM Handling

PCI ROM Priority

[EFI Compatible ROM]

PCI Common Setting

PCI Latency Timer

[32 PCI Bus Clocks]

VGA Palette Snoop

[Disabled]

PERR# Generation

[Disabled]

SERR# Generation

[Disabled]

Load RT32 Image

[Enabled]

PCI Express Settings

PCIE Slot Option Rom Configuration

→←:

Select Screen

↑↓:

Select Item

Enter: Select Item

+/-: Change Opt.

F1: General Help

F2: Previous Values

F5: Optimized Defaults

F10: Save & Exit

ESC: Exit

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Advanced

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

PCI ROM Priority [EFI Compatible ROM]

In case of multiple option roms (Legacy and EFI Compatible), specifies what PCI

option rom to lanuch.Configuration options: [Legacy ROM] [EFI Compatible ROM]

PCI Latency Timer [32 PCI Bus Clocks]

Value to be programmed into PCI latency timer register.

Configuration options: [32 PCI Bus Clocks] [64 PCI Bus Clocks] [96 PCI Bus

Clocks] [128 PCI Bus Clocks] [160 PCI Bus Clocks] [192 PCI Bus Clocks] [224 PCI

Bus Clocks] [248 PCI Bus Clocks]

VGA Palette Snoop [Disabled]

Enables or disables VGA pallette registers snooping.

Configuration options: [Disabled] [Enabled]

PERR# Generation [Disabled]

Enables or disables PCI device to generate PERR#.

Configuration options: [Disabled] [Enabled]

SERR# Generation [Disabled]

Enables or disables PCI device to generate SERR#.

Configuration options: [Disabled] [Enabled]

Load RT32 Image [Disabled]

Enables or disables PCI device to load RT32 image.

Configuration options: [Disabled] [Enabled]