Asus Z9PR-D12 - Manual (Page 123)

ASUS Z9PR-D12 Series 5-13
5.2.3 Initializing the virtual drives
After creating the RAID sets, you must initialize the virtual drives. You may initialize
the virtual drives of a RAID sets using the Initialize or Objects command on the
Management Menu.
Using the Initialize command
To initialize the virtual drive using the Initialize command:
1. From the Management Menu, select Initialize, and then press .
2. The screen displays the available RAID sets and prompts you to select the
virtual drive to initialize. Use the arrow keys to select the virtual drive from the
Virtual Drive selection, and then press .
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Initialize VD(s)
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Select VD
Virtual Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 1 148.580GB 2 64 KB ONLINE
Virtual Drives
Virtual Drive 0
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
SPACE-(De)Select, F10-Initialize