6 apm configuration, Apm configuration -21 – Asus P7P55D-E LX User Manual
Page 63
ASUS P7P55D-E LX
2-21
2.6.6
APM Configuration
Restore On AC Power Loss [Power Off]
[Power Off]
The system goes into off state after an AC power loss.
[Power On]
The system goes into on state after an AC power loss.
[Last State]
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By RTC Alarm [Disabled]
[Disabled]
Disables RTC to generate a wake event.
[Enabled]
When set to [Enabled], the items
RTC Alarm Date (Days) / System Time
will become user-configurable with set values.
Power On By External Modems [Disabled]
[Disabled]
Disables to power up the computer when the external modem receives a
call while the computer is in Soft-off mode.
[Enabled]
The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By PCI Devices [Disabled]
[Disabled]
Disables the PME to wake up from S5 by PCI devices.
[Enabled]
Allows you to turn on the system through a PCI LAN or modem card. This
feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power On By PCIE Devices [Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event.
[Disabled]
Disables the PCIE devices to generate a wake event.
[Enabled]
Enables the PCIE devices to generate a wake event.
Power On By PS/2 Keyboard [Disabled]
[Disabled]
Disables the Power On by a PS/2 keyboard.
[Enabled]
Sets specific keys on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power On By PS/2 Mouse [Disabled]
[Disabled]
Disables the Power On by a PS/2 mouse.
[Enabled]
Enables the Power On by a PS/2 mouse. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.