Acer Altos R310 - Manual (Page 118)

Appendix C: SATA RAID configuration utility 108
9 With the key, scroll to Done, and press .
Create RAID 1 from a source drive
1 Install a new HDD and initalize it.
Warning! Do NOT initailize the source drive!
2 From the Main Menu, select Create Array, and press .
3 Press the key to add to the new drive(s) to the Selected
Drives field.
4 Press the key to confirm your selection.
5 In the Array Type field, move the cursor to RAID 1(Mirror) and
press the key.
6 Use the key to scroll to the Array Label field and enter text
to identify the array. Press to confirm the array’s label.
7 Using the key, scoll to the Create RAID via field and select.
Build. Press to continue.
8 With the key, scroll to Done, and press .
BB!S421!.!FO/cppl!!Qbhf!219!!Xfeoftebz-!Nbsdi!35-!3115!!6;1:!QN