Acer Altos R310 - Manual (Page 117)

107
Create RAID 0 from source drive
1 Install a new HDD and initalize it.
Warning! Do NOT initailize the source drive! Doing so will
destroy all data!
2 From the Main Menu, select Create Array, and press .
3 Press the key to add to the new drive(s) to the Selected
Drives field.
4 Press the key to confirm your selection.
5 In the Array Type field, move the cursor to RAID 0(Stripe) and
press the key.
6 Use the key to scroll to the Array Label field and enter text
to identify the array. Press to confirm the array’s label.
7 Scroll to Stripe Size, by using the key, and select 16 KB, 32
KB, or 64 KB using the arrow keys. Press to confirm the
array stripe size.
8 Using the key, scoll to the Create RAID via field and select.
Migrate. Press to continue.
9 With the key, scroll to Done, and press .
10 Select the Source Drive, and press followed by .
Create RAID 1 from new drives
1 Install new HDD(s) and initalize it/them.
2 From the Main Menu, select Create Array, and press .
3 Press the key to add to the new drive(s) to the Selected
Drives field.
4 Press the key to confirm your selection.
5 In the Array Type field, move the cursor to RAID 1(Mirror) and
press the key.
6 Use the key to scroll to the Array Label field and enter text
to identify the array. Press to confirm the array’s label.
7 Scroll to Stripe Size, by using the key, and select 16 KB, 32
KB, or 64 KB using the arrow keys. Press to confirm the
array stripe size.
8 Using the key, scoll to the Create RAID via field and select.
Clear or Quick Init. Press to continue.
BB!S421!.!FO/cppl!!Qbhf!218!!Xfeoftebz-!Nbsdi!35-!3115!!6;1:!QN