Acer Altos R310 - Manual (Page 106)

Appendix B: Rack installation 96
6 Install the server into the rack by carefully aligning the inner rails
attached to the server with the mounting rails on the rack.
a Press the release latch on both sides of the server.
b Slide the server into the rack then push until it clicks.
Caution! To avoid personal injury, care should be taken when
pressing the component rail release latches and sliding the
component into the rack.
BB!S421!.!FO/cppl!!Qbhf!:7!!Xfeoftebz-!Nbsdi!35-!3115!!6;1:!QN