Asus CROSSHAIR E2711 - Manual (Page 99)

ASUS Crosshair -
IRQ Resources
IRQ Resources
IRQ-5 assigned to [PCI Device]
IRQ-7 assigned to [PCI Device]
IRQ-9 assigned to [PCI Device]
IRQ-10 assigned to [PCI Device]
IRQ-11 assigned to [PCI Device]
IRQ-14 assigned to [PCI Device]
IRQ-15 assigned to [PCI Device]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
Select Menu
Item Specific Help
Legacy ISA for devices
compliant with the original
PC AT bus specification,
PCI/ISA PnP for devices
compliant with the Plug
and Play standard whether
designed for PCI or ISA
bus architecture.
IRQ-xx assigned to
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices.
Configuration options: [PCI Device] [Reserved]
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Select Menu
Item Specific Help
Onboard Device Configuration
IDE Function Setup
Serial-ATA Configuration
USB Configuration
Onboard 1394 Controller [Enabled]
Onboard 1st nVidia LAN [Enabled]
Onboard 2nd nVidia LAN [Enabled]
Onboard nVidia Lan Boot ROM [Disabled]
Primary Display Adapter [PCIEX16_1]
HD Audio [Auto]
Front Panel Support Type [AC97] [AC97]
Silicon SATAII Controller [SATA Mode]
Internal Connector LED [Disabled]
LCD Poster Back Light [Disabled]
LCD Poster Mode [Current Time]
x LCD Poster String
Phoenix-Award BIOS CMOS Setup Utility
Advanced
4.5.4 Onboard Device Configuration
The item IRQ Resources becomes user-configurable when you set Resources
Controlled By to [Manual].