3 onboard switches – Asus CROSSHAIR E2711 User Manual
Page 61
ASUS Crosshair
2-
2.8.3
Onboard switches
Onboard switches allow you to fine-tune performance when working on a bare
or open-case system. This is ideal for overclockers and gamers who continually
change settings to enhance system performance.
1. Clear CMOS switch
Press the clear CMOS switch to clear setup information when the system
hangs due to overclocking.
CROSSHAIR
CROSSHAIR CMOS switch
To prevent accidental pressing of the Clear CMOS switch, the CLRTC jumper
default setting disables the switch. See page 2-23 for details.
15. Thermal sensor cable connectors (W1/2/3, 2-pin)
These connectors are for temperature monitoring. Connect the thermal
sensor cables to these connectors and place the other ends to the devices,
which you want to monitor temperature. The optional fan1~3 can work with
the temperature sensors for a better cooling effect.
CROSSHAIR
WJ1
Temperature2
Ground
Temperature2
Ground
WJ2
Temperature3
Ground
WJ3
CROSSHAIR Thermal sensor cable connectors