Asus CROSSHAIR E2711 - Manual (Page 154)

5-34 Chapter 5: Software support
Manual configuration
a. Select Manual
configuration and press
. The following
pop-up menu appears.
b. Use the up or down
arrow keys to select a
chunk size appropriate
to your drive usage then
press .
MAIN MENU
Auto configuration
Manual configuration
chunk size
4K
8K
16K
32K
64K
128K
Creating a RAID 0 set (Striped)
To create a RAID set:
1. From the Silicon Image
configuration utility main
menu, select Create RAID
set then press to
display an option menu.
2. Select RAID 0 then press
to display the
following.
3. Select your desired method of configuration.
Auto configuration
a. Select Auto Configuration the press .
b. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press .
c. Press to confirm or to return to the Main Menu.
MAIN MENU
Auto configuration
Manual configuration
By default, Auto configuration sets the stripe size to 64K and sets the logical
drives based on the physical drives installed.
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
RAID0
RAID1
SPARE DRIVE
CONCATENATION