Bosch HSD5051UC - Manual

For help and assistance with Bosch accessories please visit: www.bosch-eshop.com/eshop/bosch/us or call 1-800-944-2904 Mon-Fri 5am to 6pm PST Sat 6am to 3pm PST
Notes: All height, width and depth dimensions are shown in inches. Please refer to installation instructions prior to making cutout. BSH reserves the absolute and unrestricted right
to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details. Applicable product
warranty can be found in accompanying product literature or you may contact your account manager for further details.
Warranties: Bosch warrants that the Product is free from defects in materials and workmanship for a period of three hundred and sixty-five (365) days from the date of purchase. The foregoing
timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended, for any reason whatsoever. This Product is also warranted to be free from cosmetic
defects in material and workmanship (such as scratches of stainless steel, paint/porcelain blemishes, chip, dents, or other damage to the finish of the Product, for a period of thirty (30) days
from the date of purchase or closing date for new construction. This cosmetic warranty excludes slight color variations due to inherent differences in painted and porcelain parts, as well as
differences caused by kitchen lighting, product location, or other similar factors. This cosmetic warranty specifically excludes any display, floor, “As Is”, or “B” stock appliances.
For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904
© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.
General Properties
Door opening Push to Open
Hinges Ball bearing hinges
Capacity
Cavity capacity (cu. ft.) 2.4 cu. ft.
Dimensions & Weight
Overall appliance
dimensions (HxWxD)
(in)
9 7/16" x 29 3/4 x
23 1/2"
Required cutout size
(HxWxD) (in)
9 1/4" x 28 1/2" x
23 1/2"
Net weight (lbs) 47 lbs
Accessories—Included
Installation brackets Installation
brackets to install
drawer below
speed or steam
oven in one cut out
(identical to single
wall oven cut out)
Drawer mat Rubber mat to
protect bottom of
drawer
The storage drawer is
designed to match the
perfectly flush fit of a
Bosch wall, speed or
steam oven.
Features & Benefits
The storage drawer fits
30" racks, the meat probe
and other cooking relevant
utensils.
A silicone mat protects the
bottom of drawer.
Installs vertically under
Bosch speed, steam or
wall oven.
Matches Bosch built-in
products. Install either
flush or proud.
HSD5051UC
Stainless Steel
500 Series - Stainless Steel HSD5051UC
30" Storage Drawer