Signal – Bosch WAP24200UC User Manual

Page 25

▯

Leave the front door and detergent drawer open so

that any remaining water can dry up.

▯

Always wait for the end of the cycle; otherwise the

appliance may still be locked. If locked, switch the

appliance on and wait until it unlocks.

▯

If at the end of the cycle the display is not lit up, the

energy saving mode is active. To see display, press

any button.

Signal

1. Activate adjustment mode for the signal volume

Place on

Hold Spin speed button down + turn one posi-

tion to the right.

Hold down for an additional 5 s until the

display elements light up. Adjustment

mode is activated.

2. Setting volume for button signals (depending on the model)

Press until the desired volume has been reached.

to 3. or

in order to exit the adjustment mode for the sig-

nal volume.

3. Setting volume for indicator signals

Turn one position to the

right.

Press until the desired volume

has been reached.

in order to exit the adjustment mode for the signal

volumen.