Flat oven racks, Grasp rack firmly on both sides, Tilt rack up to allow stop into rack guide – Bosch HGS7282UC User Manual
Page 10: Figure 4: inserting a rack, Extension oven rack (some models), Figure 5: full extension rack
Getting Started
English 8
Flat Oven Racks
The racks are designed with a stop so they will stop before coming completely out
of the oven and not tilt.
CAUTION
To avoid burns, place oven racks in desired positions before turning
oven on. Always use oven mitts when the oven is warm.If a rack must
be moved while the oven is hot, do not let oven mitts contact hot burn-
ers.
Inserting Racks Into Oven
1.
Grasp rack firmly on both sides.
2.
Tilt rack up to allow stop into rack guide.
3.
Bring rack to a horizontal position and press the rest of the way in. Rack
should be straight and flat, not crooked.
Removing Flat Racks From Oven
1.
Grasp rack firmly on both sides and pull rack toward you.
2.
When the stop is reached, tilt rack up and pull the rest of the way out.
Extension Oven Rack (some mod-
els)
The Full Extension Rack allows for easier access to cooking foods. The bottom
section extends as far as the standard flat rack. However, the top section extends
beyond the bottom section bringing the food closer to the user. To order a full
extension rack, contact Service or a dealer near you.
Figure 4: Inserting a Rack
Insert rack with the back of the rack
toward the back wall of the range.
Back of rack
Front of rack
Figure 5: Full Extension Rack
Top Rack
Back of Rack
Pan Stops
Bottom
Rack
Stops
Top Rack Rest
Rack Guide
Front of Rack
Top Rack
Stop (Ball)